Power Supply 12V/2A (DIN, UPS)

• 12 V DC output, 2.0 A, 40 W
• Integrated battery charger, 13.8 V DC at 1.0 A
• Transfers to battery on mains failure
• Reports AC and battery status
• Input 90-264 V AC / 127-370 V DC
• 35 mm DIN rail mounting

The PIERRE Power Supply 12V/2A (DIN, UPS) powers the connected load and float-charges a backup battery from one unit. On mains failure it transfers the load to the battery without interruption, so controllers, readers, door releases and intercom hardware stay alive through an outage.

Output is 12 V DC at 2.0 A, 40 W total. Battery charging runs at 13.8 V DC and 1.0 A. The unit reports AC status and battery status back to the system, so a failed battery or a lost mains feed is visible rather than silent.

Input is 90-264 V AC or 127-370 V DC. It clips onto 35 mm DIN rail, is rated IP20, and operates from -30 °C to +70 °C.